Nabata na webụsaịtị anyị!
English
1
ọkọlọtọ (1)
ọkọlọtọ (3)
ọkọlọtọ (2)
Manganin Enameled Waya 0.1mm, 0.2mm, 0.5mm Ihe Nguzogide Nguzogide Alloy Waya egosipụtara
  • Manganin Enameled waya 0.1mm, 0.2mm, 0.5mm Elu-nkenke Nguzogide Alloy Waya
  • Manganin Enameled waya 0.1mm, 0.2mm, 0.5mm Elu-nkenke Nguzogide Alloy Waya
  • Manganin Enameled waya 0.1mm, 0.2mm, 0.5mm Elu-nkenke Nguzogide Alloy Waya
  • Manganin Enameled waya 0.1mm, 0.2mm, 0.5mm Elu-nkenke Nguzogide Alloy Waya
  • Manganin Enameled waya 0.1mm, 0.2mm, 0.5mm Elu-nkenke Nguzogide Alloy Waya
  • Manganin Enameled waya 0.1mm, 0.2mm, 0.5mm Elu-nkenke Nguzogide Alloy Waya

Manganin Enameled waya 0.1mm, 0.2mm, 0.5mm Elu-nkenke Nguzogide Alloy Waya

Nkọwa dị mkpirikpi:

Àgwà ndị isi
Àgwà ndị ụlọ ọrụ pụrụ iche
Ihe nduzi ihe
Ọla kọpa Nickel Alloy
Ihe mkpuchi
PE
Ọnụọgụ nke ndị nduzi


Nkọwa ngwaahịa

FAQ

Mkpado ngwaahịa

Nkọwa ngwaahịa

Waya Manganin Enameled (0.1mm, 0.2mm, 0.5mm) Waya Alloy Resistance dị elu

Nchịkọta ngwaahịa

Manganinenameled wayabụ waya alloy na-eguzogide nkenke nke nwere isi manganin (Cu-Mn-Ni alloy) nke ejiri akwa mkpuchi mkpuchi enamel dị gịrịgịrị na-eguzogide okpomọkụ. Ọ dị na dayameta 0.1mm, 0.2mm, na 0.5mm, emebere ya maka ngwa chọrọ nguzogide eletrik kwụsiri ike n'elu oke okpomoku sara mbara yana obere nguzogide mgbochi. Ihe mkpuchi enamel na-enye ihe mkpuchi ọkụ eletrik dị mma na nchedo ígwè ọrụ, na-eme ka ọ dị mma maka ndị na-emegide ya nke ọma, shunts ugbu a, na ngwá ọrụ ebe izi ezi dị oke mkpa.

Ụkpụrụ ọkọlọtọ

  • Alloy Standard: kwekọrọ na ASTM B193 (nkọwapụta manganin alloy)
  • Enamel mkpuchi: na-ezuteIEC 60317-30 (polyimide enamel maka waya okpomọkụ dị elu)
  • Ụkpụrụ akụkụ: na-agbaso GB/T 6108 (nnwere ikike nha nha waya akpọrọ aha)

Atụmatụ igodo

  • Ultra-Stable Resistance: Okpomọkụ ọnụọgụ nke nguzogide (TCR) ≤20 ppm/°C (-55°C ruo 125°C)
  • Mgbanwe Nkwụghachi dị ala: <0.01% mgbanwe mgbanwe mgbe awa 1000 gachara na 100°C
  • Arụmọrụ mkpuchi dị elu: voltaji ndakpọ Enamel ≥1500V (maka dayameta 0.5mm)
  • Njikwa akụkụ ziri ezi: nnabata dayameta ± 0.002mm (0.1mm), ± 0.003mm (0.2mm/0.5mm)
  • Okpomọkụ Resistance: Enamel na-eguzogide ọrụ na-aga n'ihu na 180 ° C (mkpuchi klaasị H)

Nkọwa nka nka

Njirimara 0.1mm dayameta 0.2mm dayameta 0.5mm dayameta
Ọnụ ala dayameta 0.1mm 0.2mm 0.5mm
Ọkpụrụkpụ Enamel 0.008-0.012mm 0.010-0.015mm 0.015-0.020mm
N'ozuzu dayameta 0.116-0.124mm 0.220-0.230mm 0.530-0.540mm
Nguzogide na 20 ° C 25.8-26.5 Ω/m 6.45-6.65 Ω/m 1.03-1.06 Ω/m
Ike ọdụdọ ≥350 MPa ≥330 MPa ≥300 MPa
Ogologo oge ≥20% ≥25% ≥30%
Nguzogide mkpuchi ≥10⁶ MΩ·km ≥10⁶ MΩ·km ≥10⁶ MΩ·km

Ngwakọta kemịkalụ (Manganin isi, Ụdị %)

Ihe Ọdịnaya (%)
Ọla kọpa (Cu) 84-86
Manganese (Mn) 11-13
Nickel (Ni) 2-4
Ígwè (Fe) ≤0.3
Silikon (Si) ≤0.2
Mgbakọta adịghị ọcha ≤0.5

Nkọwapụta ngwaahịa

Ihe Nkọwapụta
Ihe enamel Polyimide (Klas H)
Agba Amber eke (agba omenala dị)
Ogologo kwa Spool 500m (0.1mm), 300m (0.2mm), 100m (0.5mm)
Akụkụ Spool 100mm dayameta (0.1mm/0.2mm), 150mm dayameta (0.5mm)
Nkwakọ ngwaahịa Eji desiccants mechie n'ime akpa na-egbochi mmiri
Nhọrọ omenala Ụdị enamel pụrụ iche (polyester, polyurethane), ịkpụ-na-ogologo

Ngwa a na-ahụkarị

  • Nkenkenke ugbu a na-emechi na mita ike
  • Standard resistors maka calibration akụrụngwa
  • Ihe nlele na ihe mmetụta nrụgide
  • Akara mmiri Wheatstone zuru oke
  • Aerospace na ngwá agha

 

Anyị na-enye traceability zuru ezu maka ihe mejupụtara ihe na arụmọrụ nguzogide. Ihe nlele efu (ogologo 1m) na akụkọ nyocha zuru ezu (gụnyere akụkụ TCR) dị mgbe a rịọrọ ya. Iwu nnukwu gụnyere nkwado winding akpaghị aka maka ahịrị nrụpụta resistor.
  • Nke gara aga:
  • Osote:
    • Dee ozi gị ebe a ziga anyị ya

    Ụdị ngwaahịa

    Pịa tinye ka ịchọọ ma ọ bụ ESC mechie