1.1mm dị nro magnetic alloy1J50Waya maka chokes
Aha ihe | 1.1mm nro magnetic alloy 1j50 waya maka chokes |
Kondokto | 1J50 |
Ihe mba | 50W1B |
Onodu | Na-enwu gbaa, dị nro |
Uzo | 1.1mm |
Keuju | 8.25G / CM3 |
Ogologo | 1052m / kg |
Aro | Ihe dị ka 20KG / coil |
Ngwugwu | Ikpe |
Standadi | GB / T 15018-1194 |
Maka 1J50, ihe dị na mba ndị ọzọNix0, Alloy 50,E11a, 50h, Hy-Ra49, PB, Na-enweghị N14052, ASTM F30, DN 2.4478, ASTM 753-2 Alloy 2
Alloy na-agbaze na oghere ndị na-ajụ, mgbe ọkụ na-agbaghara mpempe akwụkwọ mpempe akwụkwọ, mgbe ahụ, ịpị, na-agwọ ọrịa, oyi na-atụ n'ime ngwaahịa ndị a rụchara.
1J50Iron-nickel alloy (ihe dị ka 50% Nickel na 48% Iron dị nro)
1j50 ngwa:
A na-ejikarị ya na ndị na-agbanwe agbanwe, laa azụ, akpaaka eletrit, agịga na-egbochi ihe ndị na-emebi ihe, Gyroscope, na-akpakọrịta njegharị, na-akpaghị ọrụ na moto.
C | Mn | Si | P | S | Ni | Cu | Fe |
≤0.03 | 0.3-0.6 | 0.15-0.3 | ≤0.02 | ≤0.02 | 49.0-51.0 | ≤0.2 | Bel. |
Ike TESILE (MPA) | Elongation (%) | Ihe siri ike (HV) |
≥530 | ≥35 | ≤155 |
Nnọọ (G / CM3) | 8.25 |
Melting Point (ºC) | 1395-1425 |
Eletriki na-adịgide adịgide na 20ºc | 0.45 |
Tetaration mkpụrụ vaịn λθ / 10-6 | 25 |
Currie Point TC / ºC | 500 |
Coficie nke linear na-agbasa (20ºC ~ 200ºC) x10-6 / ºC | ||||||
Greedi | 20-100ºC | 20-200ºC | 20-300ºC | 20-400-2C | 20-500ºC | 20-600ºC |
1J50 | 8.9 | 9.27 | 9.2 | 9.2 | 9.4 |
Njirimara ndọta nke alloys nwere oke pearmeability na ubi na-adịghị ike | |||||||
1J50 | Mbụ permeability | Oke | Mmegide | Ntinye data site na ike | |||
СMpempe akwụkwọ / mpempe akwụkwọ. Ọkpụrụkpụ, mm | μ0.08/ (mh / m) | μm/ (mh / m) | HC / (A / m) | BS/ T | |||
Ro | ≤ | ||||||
0.05 mm | 2.5 | 35 | 20 | 1.5 | |||
0.1 ~ 0.19 mm | 3.8 | 43.8 | 12 | ||||
0.2 ~ 0.34 mm | 4.4 | 56.3 | 10.4 | ||||
0.35 ~ 1.0 mm | 5.0 | 65 | 8. 8.8 | ||||
1.1 ~ 2.5 mm | 3.8 | 44.0 | 12 | ||||
Mgbochi | |||||||
8-100 mm | 3.1 | 25.0 | 24 | ||||
Ụdị na akụkụ:
Jikọtara mpempe akwụkwọ | (0.03 ~ 0.10) mm x (180 ~ 250) mm > (0.10 ~ 1.00) mm x (10 ~ 250) mm > (1.00 ~ 2.50) mm x (100 ~ 250) mm |
Waya | Φ0.10 ~ φ6.00mm |
Ribon | (4.50 ~ 20.0) mm x (50 ~ 250) mm |
Bar / Rod | Φ20.0 ~ φ100.0mm |