Ụlọ ọrụ mmepụta na ụlọ ọrụ mmepụta ihe nke ọla kọpa agba gburugburu nke 0.2mm 130 nke China

0.2mm 130 Klas Enameled Waya Agba nke Alloy Copper Alloy Manganin nke A Na-egosipụta Foto A Na-egosipụta

0.2mm 130 Klas Enameled Waya Agba Agba nke Alloy Copper Alloy Manganin

Nkọwa Dị Mkpirikpi:

Ngwa Alloy:Alloy Dabere na Ọla

Ụdị:Waya mkpuchi gburugburu

Ihe mkpuchi:Polyesterimide, Polyester

Okpomọkụ:130, 155, 180, 200, 220...

Zitere anyị ozi-e

Nkọwa Ngwaahịa

Ajụjụ Ndị A Na-ajụkarị

Akara Ngwaahịa

Waya enamel agba gburugburu nke ọla kọpa 130

1. Nkọwa Izugbe Ihe

Aluminom ọla kọpa, nke nwere obere iguzogide ọkụ eletrik, ezigbo iguzogide okpomọkụ na iguzogide nchara, ọ dị mfe nhazi na ịgbado ọkụ lead. A na-eji ya eme ihe ndị bụ isi na relay okpomọkụ, obere ihe mgbochi okpomọkụ, na ngwa eletriki. Ọ bụkwa ihe dị mkpa maka eriri ọkụ eletrik. Ọ dị ka ụdị cupronickel. Ka Nickel na-eme ka ihe mejupụtara ya dịkwuo mma, otú ahụ ka elu ya na-acha ọcha ọlaọcha.

3. Ihe mejupụtara kemịkalụ na ihe onwunwe bụ isi nke Cu-Ni Low Resistance Alloy

NjirimaraGrade		CuNi1	CuNi2	CuNi6	CuNi8	CuMn3	CuNi10
Isi ihe mejupụtara kemịkalụ	Ni	1	2	6	8	_	10
	Mn	_	_	_	_	3	_
	Cu	Bọọl	Bọọl	Bọọl	Bọọl	Bọọl	Bọọl
Oke Okpomọkụ Ọrụ Na-aga n'ihu (oC)		200	200	200	250	200	250
Ndozi ike na 20oC (Ωmm2/m)		0.03	0.05	0.10	0.12	0.12	0.15
Njupụta (g/cm3)		8.9	8.9	8.9	8.9	8.8	8.9
Ọgbakọ okpomọkụ (α×10-6/oC)		<100	<120	<60	<57	<38	<50
Ike nrụgide (Mpa)		≥210	≥220	≥250	≥270	≥290	≥290
EMF vs Cu(μV/oC)(0~100oC)		-8	-12	-12	-22	_	-25
Ebe Mgbaze Dị Ihe Dị Ka Ya (oC)		1085	1090	1095	1097	1050	1100
Nhazi Micrographic		austenit	austenit	austenit	austenit	austenit	austenit
Njirimara Magnetik		abụghị	abụghị	abụghị	abụghị	abụghị	abụghị

NjirimaraGrade		CuNi14	CuNi19	CuNi23	CuNi30	CuNi34	CuNi44
Isi ihe mejupụtara kemịkalụ	Ni	14	19	23	30	34	44
	Mn	0.3	0.5	0.5	1.0	1.0	1.0
	Cu	Bọọl	Bọọl	Bọọl	Bọọl	Bọọl	Bọọl
Oke Okpomọkụ Ọrụ Na-aga n'ihu (oC)		300	300	300	350	350	narị anọ
Ndozi ike na 20oC (Ωmm2/m)		0.20	0.25	0.30	0.35	0.40	0.49
Njupụta (g/cm3)		8.9	8.9	8.9	8.9	8.9	8.9
Ọgbakọ okpomọkụ (α×10-6/oC)		<30	<25	<16	<10	<0	<-6
Ike nrụgide (Mpa)		≥310	≥340	≥350	≥400	≥400	≥420
EMF vs Cu(μV/oC)(0~100oC)		-28	-32	-34	-37	-39	-43
Ebe Mgbaze Dị Ihe Dị Ka Ya (oC)		1115	1135	1150	1170	1180	1280
Nhazi Micrographic		austenit	austenit	austenit	austenit	austenit	austenit
Njirimara Magnetik		abụghị	abụghị	abụghị	abụghị	abụghị	abụghị

2. Okwu Mmalite na ngwa nke Waya Enamel

Ọ bụ ezie na a kọwara ya dị ka "enamel",waya enamelN'eziokwu, anaghị ekpuchi ya na agba enamel ma ọ bụ vitreous enamel nke e ji ntụ iko gwakọtara agwakọta kpuchie. Waya magnet nke oge a na-ejikarị otu ruo anọ (n'ihe gbasara waya ụdị quad-film) nke mkpuchi ihe nkiri polymer, nke na-abụkarị ihe mejupụtara abụọ dị iche iche, iji nye oyi akwa mkpuchi siri ike, na-aga n'ihu. Ihe nkiri mkpuchi waya magnet na-eji (n'usoro okpomọkụ na-abawanye) polyvinyl formal (Formar), polyurethane, polyimide, polyamide, polyster, polyester-polyimide, polyamide-polyimide (ma ọ bụ amide-imide), na polyimide. Waya magnet nke Polyimide nwere ike ịrụ ọrụ ruo 250 °C. A na-ejikarị teepu polyimide ma ọ bụ fiberglass kpuchie waya magnet nke dị arọ ma ọ bụ akụkụ anọ, a na-etinyekwa windings emechara na vacuum iji melite ike mkpuchi na ntụkwasị obi ogologo oge nke winding.
A na-eji waya kpuchie eriri ndị na-akwado onwe ha ma ọ dịkarịa ala akwa abụọ, nke kachasị mpụta bụ thermoplastic nke na-ejikọta ntụgharị ahụ mgbe a na-ekpo ọkụ.
A na-ejikwa ụdị mkpuchi ndị ọzọ dịka eriri fiberglass nwere varnish, akwụkwọ aramid, akwụkwọ kraft, mica, na ihe nkiri polyester n'ụwa niile maka ọtụtụ ọrụ dịka transformers na reactors. Na ngalaba ọdịyo, enwere ike ịchọta waya nke ihe owuwu ọlaọcha, na ihe mkpuchi ndị ọzọ dị iche iche, dị ka owu (mgbe ụfọdụ a na-ejupụta na ụdị ihe na-eme ka ihe dị arọ/dị arọ, dị ka beeswax) na polytetrafluoroethylene (PTFE). Ihe mkpuchi ochie gụnyere owu, akwụkwọ, ma ọ bụ silk, mana ndị a bara uru naanị maka ojiji dị ala (ruo 105°C).
Maka mfe imepụta ihe, ụfọdụ waya magnet nke nwere obere okpomọkụ nwere ihe mkpuchi nke enwere ike iwepụ site na okpomọkụ nke ihe mkpuchi. Nke a pụtara na enwere ike ịme njikọ eletriki na nsọtụ ya na-ebughị ụzọ wepụ ihe mkpuchi ahụ.